UKHELI.COM T-REX 600n
Final parts of the air frame !
Little to do the the air frame now. Drop the head into the 3 main bearing blocks.
As it passes through the lower one pass it into the main gear set.
Fix with the 3mm cap head and nyloc nut.
Pull the head up, push the top collar down and lock with 2 set screws and loctite.
Fit the 3 links, each 60.5mm long to the swash and levers below and
fit the anti rotation bracket with the two self tapper cap heads.
With two more cap head self tappers fit the canopy clip to the canopy as show with
the canopy between the top and bottom of the clip.
It should look like this I hope...........
I like to get the air frame finished then fit the radio gear. That's coming next !